BASIC OPERATIONS (CONT.)
REPLAY LOOP
- The
rEloop (10)
function allows you to return to your
stored loop at any time. The
In Button (14)
and
out Button (13)
LEDs will
indicate a loop is stored in memory, and may be played at any time. To replay
the loop, press the
rEloop Button (10).
The
In Button (14)
and
out But-
ton (13)
LEDs will again begin to flash indicating SEAMLESS LOOP mode has
been activated and your stored loop will immediately begin to play.
Figure 20
Figure 19
©
American Audio
®
- www.AmericanAudio.us - CK 1000Mp3 Instruction Manual Page 21
10. CHANGING THE TImE DISPLAY (57)/TImE BAR (51):
DURING NORMAL PLAYBACK, pressing the
tImE Button (4),
will change the
time display information in the
lcd (21)
. The following is a break down of the
time settings and their definitions:
1) REMAIN (58) - This details the time in the
lcd (21)
as the current tracks’
remaining running time.
2) ELAPSED (58) - This details the time in the
lcd (21)
as the current tracks’
elapsed running time.
3) TOTAL REMAIN (58) - This details the time in the
lcd (21)
as the current CD
total remaining running time.
TIME BAR INDICATOR
- Details the time defined in the
tImE mEtEr (57)
as a visual bar icon. As with the
tImE mEtEr (57)
this bar is also dependent on the selected time function
[rEmaIn, total rEmaIn, or
ElapSEd (58)].
This bar will begin to flash when a track is ending regardless of which time function you are in.
Use the flashing bar as a visual reminder that a track is ending.
