American Aerospace Corporation
ST-4000i Flash Analyzer
ST4000i-OM-01 Rev C
PAGE 6
4.0
Display Style & Selection
On Start up the American Aerospace Logo will be displayed during boot up,
after which the home screen will load in approximately 17 seconds. Figures 4.0
& 4.1. On the Home screen six (6) apps will appear.
“
RED
”, “
WHITE
”,
“
SETTINGS
”, “
FILES
”, “
INFO
” and “
SLEEP
”.
FIGURE 4.0: ST 4000i Start up FIGURE 4.1: ST 4000i Home Screen
A.
T
he “
Red Airplane
” app is selected if the Operator is measuring a
RED Strobe Lamp source.
B.
The “
White Airplane
” app is selected if the Operator is measuring a
WHITE Strobe Lamp source.
NOTE: In both Red and White Airplane
App ‘Xenon’ or ‘LED’ Light Sources can be
selected. For Xenon Light source ensure LED selection is in OFF position
and ON when testing a LED light source
C.
The “
Settings
” app is for American Aerospace use only and should
not be used by the operator. The ST-4000
i
is pre programmed and
calibrated by American Aerospace Corporation. Changing any
setting will affect how accurate the flash analyzer measures.
D.
The
“
Files
”
app is where all readings are recorded and stored. With
this app the operator can scroll through previous recorded results.
E.
The
“
Info
” app is for American Aerospace Corp use only and also
should not be used by the Operator. The Info app is used by
American Aerospace to program and calibrate the unit.
F.
The
“
Sleep
” app is used when the operator desires to place the ST-
4000
i
in a temporary hibernation mode. When the operator is ready
to resume testing, simply touch the screen and the unit will turn on
and return to the home screen.
