background image

Remove the RF wireless remote control from the B Media Player box. Unscrew the 

waterproof cap on the back of the remote control. Place the CR24 50 battery in the RF remote 

control and replace the water/dust proof cap.

When the battery is installed, the remote control LCD should be solid and bright without any 

1.6 Remote Control Battery Install

The B re12V DC to both the red and yellow wires.  When both of these wires 

have power the B is powered on and is indicated by a red LED on the harness grom

met of the stereo.

In a spa application this requires the red and yellow wires to be jumped together and then con

nected to the +12VDC output of the power source.  In this set up the B will always be 

on, with a very low current draw when idle.

In a boat, ATV or other application requiring power from a battery, the yellow wire (constant 

power) should be connected to the battery, and the red wire connected to the ignition or a switch. 

1.5 Power On

The remote should already be paired from the factory, but if you need to re synchronize the 

remote follow the steps below.

1. Press the      POWER button on the remote control to turn on the remote.
2. The LCD will become illuminated and read ‘NO LINK’.
3. Press and hold the MODE button for 5 – 10 seconds.
4. Once the remote has been paired, the LCD will display one of the audio modes (FM, USB, 

BT AUDIO).

1.7 Remote Control Synchronizing

For any additional remote controls, you will also need to activate/synchronize those remote con -

trols by following the steps above.

top make sure the battery is installed correctly.  If battery voltage is below 3V DC replace the battery.

If the LCD displays “NO LINK” in any mode, this means the remote is out of reception range or not paired correctly. 

Move the remote closer to the unit and try again.

If you lose your remote control and buy a new remote control, please follow the above to pair remote control.

Getting Started

B Media Player 

5

4211-158   05/18/16

Summary of Contents for BLUECUBE +













Reviews: