- 7 -
Installing the Network Camera
A.
Attach the bracket that comes in the package to the Bracket Nut Hole
B.
Connect the Ethernet Plug to the Network Connector RJ-45 from the device.
C.
Plug the Power Jack to the Power Connector (Not necessary for Power-over-Ethernet Network
Camera Models).
After the Power Connector is plugged in, the Network Camera will boot up. Wait a few seconds for the Network
Camera to startup
How to adjust the lens focus
In order to adjust the focus of the Network Camera, turn the focus ring in clockwise direction to get the
appropriate image.
Note
: it is required get connected to the Network Camera prior to adjust the focus.
