Amedia HK Ltd. Wireless Multimedia Connectivity Solutions
2.2 AV Receiver
Front
Panel: Back
Panel:
2A
-Power on LED
2D -IR remote control window
2B -Link
LED 2E
-Paring
button
2C -Paring
LED
2F
-
Audio output (Right channel)
2G -Audio output (Left channel)
2H -Video output (CVBS)
2J -S-Video
output
2K -DC power input (5V)
3. Setup Guide
To enjoy a life of wireless video and audio, just connect the AV Sender to any A/V source you like
(cable/satellite set-top box, PVR, DVD, media center PC, etc.) and connect the AV Receiver to the
desired A/V display device, such as TV, monitor, projector or speaker in another location.
3.1 Connect the AV Sender to an A/V Source
Step 1: Connect one end of the A/V cable (RCA or S-Video) to the audio (1F, 1G), and video (1H for
RCA and 1J for S-video) input jacks, and connect the other end of the A/V cable to the
source device via its “AV output ”.
Step 2: Plug the IR Extender in the IR output jack (1D), and place the IR emitter in front of the
source device (make sure that the IR emitter directly faces the IR sensor window of the
source device).
Step 3: Power on the AV Sender by connecting the DC plug of the Power Adapter to the DC jack
(1K), and connect the power supply to an outlet.
Step 4: The Power on LED (1A) shall be on. The Link LED (1B) shall start blinking in 10 seconds
after power on.
4
