5 ASSEMBLY
17
Electric Portable Patient Lift
5.4
Assembling the Boom Actuator
1.
Remove the shoulder bolt, washer and nut from the mounting
bracket on the boom assembly.
2.
Unpack the pinch guard from the patient lift carton.
3.
Cut the plastic-wrap that secures the boom and mast together.
4.
Lift-up on the boom and place it on your left shoulder.
5.
Let the boom actuator rest on your shoulder and rotate the shaft
extension of the actuator assembly until it lines-up with the
mounting holes in the boom assembly.
6.
Place the pinch guard over the shaft extension of the boom
actuator.
7.
Align the holes of the boom assembly mounting bracket with those
of the boom actuator and insert the bolt. Secure with nut.
CAUTION
DO NOT overtighten the nut and bolt. This damages
the mounting bracket.
The bottom of the boom actuator assembly will already
be assembled to the mast mounting bracket.
Be sure that the bolt is completely through the holes of
the boom assembly mounting bracket and the actuator
assembly. The boom assembly will pivot easily if the
mounting hardware is aligned properly when the boom
assembly is secured to the mast.
Pinch Guard
Mounting Bracket
Turn 90°
Boom Actuator
Shoulder Bolt
Washer
Nut
Mast Mounting Bracket
Boom Actuator
Shaft Extension
Boom
Assembly
