26
Electrical Data
Chapter 7
AMD Sempron™ Processor Model 10 with 256K L2 Cache Data Sheet
31994A —1 August 2004
7.3
Voltage Identification (VID[4:0])
Table 6 shows the VID[4:0] DC Characteristics. For more
information on VID[4:0] DC Characteristics, see “VID[4:0]
Pins” on page 74.
Southbridge
RESET#, INTR, NMI, SMI#, INIT#, A20M#,
FERR, IGNNE#, STPCLK#, FLUSH#
See “General AC and DC Characteristics” on page 32,
“INTR Pin” on page 72, “NMI Pin” on page 72, “SMI#
Pin” on page 73, “INIT# Pin” on page 71, “A20M# Pin”
on page 68, “FERR Pin” on page 69,“IGNNE# Pin” on
page 71, “STPCLK# Pin” on page 73, and “FLUSH# Pin”
on page 71.
JTAG
TMS, TCK, TRST#, TDI, TDO
See “General AC and DC Characteristics” on page 32.
Test
PLLBYPASS#, PLLTEST#, PLLMON1,
PLLMON2, SCANCLK1, SCANCLK2,
SCANSHIFTEN, SCANINTEVAL, ANALOG
See “General AC and DC Characteristics” on page 32,
“PLL Bypass and Test Pins” on page 72, “Scan Pins” on
page 73, “Analog Pin” on page 68.
Miscellaneous DBREQ#, DBRDY, PWROK
See “General AC and DC Characteristics” on page 32,
“DBRDY and DBREQ# Pins” on page 69, “PWROK Pin”
on page 73.
APIC
PICD[1:0]#, PICCLK
See “APIC Pins AC and DC Characteristics” on page 37,
and “APIC Pins, PICCLK, PICD[1:0]#” on page 68.
Thermal
THERMDA, THERMDC
See Table 13, “Thermal Diode Electrical Characteristics,”
on page 35, and “THERMDA and THERMDC Pins” on
page 73.
Table 5.
Interface Signal
G
roupings (continued)
Signal
G
roup
Signals
Notes
Table 6.
VID[4:0] DC Characteristics
Parameter
Description
Min
Max
I
OL
Output Current Low
6 mA
V
OH
Output High Voltage
–
5.25 V *
Note:
*
The VID pins are either open circuit or pulled to ground. It is recommended that these pins
are not pulled above 5.25 V, which is 5.0 V + 5%.