background image

More troubleshooting information can be found on the AMD Web site. Please visit

http://support.amd.com

.

6.1.3.1  There is a black border around the TV when using an HDMI™ connection.

Try adjusting the overscan/underscan of the TV. For more information, see

knowledgebase article 

GPU-72

: Unable to Adjust a Digital Display to Match the

Resolution of the Desktop

.

6.1.3.2  There is no display on the TV.

The TV will not display anything until Windows starts; this may take several minutes.
Make sure the TV is set to YPbPr input.

6.1.3.3  DVDs will not play in high-quality modes.

For displays connected using an analog connection, playback of CSS-protected DVDs

may be restricted to certain modes.
For displays connected using a digital connection, playback on certain DVD players

may also be restricted if HDCP (high-bandwidth content protection) cannot be enabled.

This restriction also applies to displays connected using active DisplayPort adapters.

6.1.3.4  The display appears tilted.

Consult the HDTV documentation.

6.1.3.5  TVs/monitors connected cannot be enabled.

Check individual connections to the TVs/monitors.
If TVs and/or monitors connected using DisplayPort adapters, passive dongles, or

active dongles cannot be enabled, visit 

http://www.amd.com/eyefinity

 to check the

connectivity options available for your graphics card and that your chosen

configuration is supported.
For a list of AMD Eyefinity validated dongles, see 

http://support.amd.com

.

6.1.3.6  Required display resolution is missing/unavailable in
AMD Catalyst™ Control Center/AMD FirePro™ Control Center.

Make sure that:

The desired resolution is supported for the display being used.

The graphics driver has been properly installed.

The connectors, cables, switches, and/or adapters connecting the display to the

graphics card are compatible and correctly configured.

For more troubleshooting steps, see knowledgebase 

GPU-10

: Inability to Select a

Specific Resolution for a Display Device in AMD Catalyst™ Control Center.

24 Reference

AMD Radeon™ R7 240/R7 250 Graphics

© 

2014

 Advanced Micro Devices, Inc.

Summary of Contents for R7 240







































Reviews: