4.
Remove any unneeded graphics cards from the computer.
Warning:
Some graphics cards can get hot while operating. Wait approximately five
minutes after turning off the computer before touching the card.
5.
Locate the PCIe slots on the motherboard. If necessary, also remove the
corresponding back panel cover.
6.
Align the new graphics card in the secondary PCIe slot next to the existing
graphics card and press firmly until the card is fully seated.
Tip:
For optimal performance in a dual-GPU AMD CrossFire configuration,
make sure that each AMD Radeon R7 240/R7 250 graphics card is separated by
at least one empty expansion slot.
7.
If needed, connect the power supply to the cards.
Tip:
The location of power connections may vary between models. They can
be located on either the side or back of the card.
12 AMD CrossFire™ Technology
AMD Radeon™ R7 240/R7 250 Graphics
©
2014
Advanced Micro Devices, Inc.
Summary of Contents for R7 240
Page 1: ...AMD Radeon R7 240 R7 250 Graphics User Guide Part Number 54241_enu_1 0...
Page 4: ...iv AMD Radeon R7 240 R7 250 Graphics 2014 Advanced Micro Devices Inc...
Page 22: ...16 AMD CrossFire Technology AMD Radeon R7 240 R7 250 Graphics 2014 Advanced Micro Devices Inc...
Page 38: ...32 Reference AMD Radeon R7 240 R7 250 Graphics 2014 Advanced Micro Devices Inc...
