Enabling SDI
SDI functionality is not enabled by default on your AMD FirePro V7900 SDI. It must be
enabled in the Catalyst™ Control Center software application. Once the AMD drivers
and software have been downloaded and installed (see the installation instructions in
Chapter 4 Software Installation
), complete the following steps to enable SDI
functionality.
1.
Launch the Catalyst Control Center.
2.
Navigate to the
AMD FirePro
▷
Serial Digital Interface
page.
3.
Check the
Enable Serial Digital Interface
checkbox.
4.
Use the slider to select the size of the DirectGMA aperture exposed by the GPU.
22 Software Installation
AMD FirePro™ V7900 SDI
©
2011
Advanced Micro Devices Inc.
Summary of Contents for FirePro V7900 SDI
