AMD FirePro V7900 SDI, User Manual

Page: 10 / 52

2. Shut down and disconnect your computer system.
3. Remove any installed graphics card(s).
4. Install your new AMD FirePro graphics card.
5. Reassemble and connect your computer system.
6. Download and install the AMD FirePro drivers and configuration software from
the AMD website.
Before You Begin Installation
Once you have determined that your system meets the minimum requirements,
please perform the following tasks before installing your AMD FirePro V7900 SDI
workstation graphics card.
Recording Serial Numbers
The serial number and 102 part number on the graphics card are required for product
registration. They are located on a sticker on the back of the graphics card and are
shown in boldface and underlined in the illustration below.
Record these numbers in the space provided below and retain for future use.
1. Remove the graphics card from packing.
2. Locate the white label on the back of the graphics card.
3. Record the serial number and 102 part number.
Figure 1–1 Typical Serial Number and 102 Part Number Arrangement
1 Serial number (S/N)
2 102 part number (P/N)
2 Getting Started
AMD FirePro™ V7900 SDI
©
2011 Advanced Micro Devices Inc.