AMD ATI TV Wonder 650 PCIe, User Manual, Page: 11 / 20

Backplate Connections
Figure 2–2 ATI TV Wonder™ 650 PCIe Backplate
The following connections are available on the backplate of your tuner card:
1
ANT IN.
RF input for digital TV antenna (ATSC)
2
S-VID.
Video input for S-Video (direct) or composite connection with
adapter (included)
3
TV IN.
RF input for analog TV or FM radio
4
AUDIO.
3.5MM stereo connection for audio input
Installation Steps
1.
Turn off the computer, monitor, and other peripheral devices.
2.
Unplug the computer's power cord, and disconnect all cables from the back
of your computer.
Caution:
Wait approximately 20 seconds after unplugging the power cord before
disconnecting a peripheral or removing a component from the
motherboard to avoid possible damage to the motherboard.
3. Remove the computer cover. If necessary, consult your computer's manual
for help in removing the cover.
Caution:
Remember to discharge your body's static electricity by touching the
power supply or the metal surface of the computer chassis before touching
the motherboard or components.
4.
Locate an available PCIe slot and, if necessary, remove the metal back-plate
cover.
5. Align your card with the slot, then press the card in firmly until it is fully
seated.
6. Screw in or fasten the card securely and replace your computer cover.
Hardware Installation
5
© 2007 AMD ATI TV Wonder™ 650 PCIe
All rights reserved. P/N 137-71119-20