Getting Started
-2-
Placing Your Webcam
The webcam has an adjustable clip base which allows the
device to be secured to a monitor, or desktop, or tripod.
Placement on a Monitor
- Grasp the webcam, as displayed in the image below,
and open the clip base.
- Place the opened clip base onto the monitor making
sure the foot of the clip base is flush with the back of the
monitor.
Getting Started
-3-
Setting Up Your Webcam
Placement on a Flat Surface
Place the camera on a flat
surface and use the adjustable
clip base to move and adjust
the camera according to your
preference.
Using the Privacy Cover
Located on top of the camera is
a switch that allows the privacy
cover to slide over the lens.
Move the switch left and right to
open and close the privacy
cover.
Placement on a Tripod
Place the 1/4”20 tripod screw on
the bottom of the adjustable clip
base to the male end of a tripod
and twist the base allowing it to
be secured to the tripod (sold
separately).
