background image

 

  

 

 

 

 

  

Working Temperature / Humidity   

-30°C ~ +50°C (-22°F ~ +122°F), Humidity 90% or less  
(non-condensing)  

Storage Temperature  

-20°C ~ +60°C (-4°F ~ +140°F)  

  

FCC Statement     

        

    

1.

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 

this device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.           

2.

 

The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user 

that 

changes, or modifications not expressly approved by the party responsible for compliance could void the user's 
authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such 
as on a computer disk or over the Internet, the information required by this section may be included in the manual 
in that alternative form, provided the user can reasonably be expected to have the capability to access information 
in that form.           

3.

 

(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or 

similar statement, placed in a prominent location in the text of the manual:      NOTE: This equipment has been 
tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance 
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation. If this equipment does cause harmful interference to 
radio or    

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try 

to correct the interference by one or more of the following measures:       

 -- Reorient or relocate the receiving antenna.       
 -- Increase the separation between the equipment and receiver.        
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.      
-- Consult the dealer or an experienced radio/TV technician for help.           

4.

 

RF exposure warning: This equipment must be installed and operated in accordance with provided instructions 

and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm 
from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. 
End-users and installers must be provided with antenna installation instructions and transmitter operating 
conditions for satisfying RF exposure compliance.     

IC Warning Statement      

     
TThis de

vice complies with Industry Canada’s licence

-exempt RSSs. Operation is subject to the following two 

conditions:  (1) This device may not cause interference; and  (2) This device must accept any interference, including 
interference that may cause undesired operation of the device.  Le présent appareil est conforme aux CNR 
d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux 
conditions suivantes : (1) l'appareil ne  doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter 

Summary of Contents for AF-2MVD-VARIB












Reviews: