Amcon Auto Chart Projector
7. Troubleshooting
Warning:
Do not break down, modify or repair the equipment. Doing so can
cause electric shock. Request a repair from your dealer.
Check the ‘situations’ covered in the following table for the problem you are
experiencing. If your situation is not covered or if the recommended action does not
solve the problem, contact your dealer for further support.
Situation Question
Action
Is the power supply cord plugged
in?
Plug it securely in the outlet.
Is the power cord connected to
the projector?
Plug it securely in the power
on the main body.
Is the fuse blown?
Replace the fuse.
The projection lamp
does not light with
the power switch
on.
Is the lamp (bulb) blown out?
Replace the lamp (bulb).
Are the batteries dead?
Replace the batteries.
Is there anything interrupting the
light emitter on the remote control
or the sensor on the projector
body?
Remove the interrupting
object.
The instrument
does not function
when the remote
controller switch is
pressed.
Is the remote control set at the
proper channel setting?
Change the remote
operating channel.
25
