USER
MANUAL
925NG
U
SE
B.55
7844058-00 03/20
subject to change without notice
HOW TO ASSEMBLE THE JIB
1) Let align the boom extensions of the basic crane towards the jib attachment.
2) Slowly open the basis crane extensions until the pin holes are aligned (see figure).
3) Insert the locking pin and the split pin.
4) Connect all fittings and quick couplings to the respective colour in order to avoid a dangerous
inversion of the power circuit lines.
HOW TO REMOVE THE JIB
1) Let position the jib boom with all extensions retracted parallel to the loading floor.
2) Open the extensions of the basis crane until the back of the jib is resting on the loading floor. Do
NOT push jib to make easier the extraction of the locking pin.
3) Pull the coupling sleeve to disconnect the quick couplings.
4) Disconnect the electric connectors.
5) Remove the split pin and the pin of the jib attachment.
6) Retract the extensions of basis crane up to the complete extraction of the jib attachment.