SMD-23 Integrated Stepper Drive & Motor
20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786
page: 12
Tel: (860) 585-1254 Fax: (860) 584-1973 Web: www.amci.com
ADV ANC ED
MIC RO CON T RO L S INC.
Changing the SMD23 Configuration Settings (continued)
Procedure: (continued)
10. By pressing the Apply button, the new settings will be saved in the drive’s
nonvolatile memory. The process of saving and verifying the new settings will take
about 8 seconds. During this time a warning to wait is displayed in the status display
of the window. When the process ends, a message that the command is accepted is
displayed.
11. Pressing the Test On button starts the self test. The motor will move back and forth
quarter of a revolution with slow speed until the Test button is pressed again.
Pressing the Recall button (in the menu above) will display the SMD’s current settings in
the data windows.
ERROR MESSAGES:
•
Check if power is applied to the motor;
•
Check the wire connection;
•
Check if the correct COM port is
selected
;
