AMCC 3WARE 720-0138-00, Installation Manual

Page: 68 / 126

Driver Installation Under Windows
60 3ware 9000 Series Serial ATA RAID Controller Installation Guide
To install the 3ware driver under Windows XP or 2003
When you start Windows after installing an 3ware RAID controller,
Windows recognizes it as a Plug and Play device, and brings up the
Found New Hardware Wizard. This wizard guides you in
installing the 3ware drivers (see Figure 19). Note that you will see
screens for the installation of two drivers during this process.
Figure 19. Found New Hardware Wizard, Windows XP and 2003
1 Click the Next button and respond to the questions the Wizard
displays.
2 When the Wizard prompts you to select a device driver, click
Have Disk, and then indicate that it is on the CD or floppy.
3 If the “Digital Signature Not Found” message appears, click
Yes to continue the installation.
4 When the Completing the Found New Hardware Wizard screen
appears (Figure 20), click
Finish .