2
2. Installation
The signaling device should be mounted by a qualified installer, holding relevant permits and licenses
(applicable and required for a given country) for Intrusion Detection Systems.
The mounting location of the signaling device should be inaccessible in order to minimize the risk of
tampering. The signaling device should be mounted on a flat surface using expansion bolts.
In order to open the enclosure of the SR136, unscrew the screw in the bottom of the housing and bend
the upper part of the enclosure (lid) upwards.
Caution! When mounting, keep an appropriate distance (minimum 5 cm) between the top edge of the
enclosure of the signaling device and the ceiling or other structures located above, so that re-mounting of the
enclosure after installation and configuration of the device will be possible.
The view of the signaling device is shown in the pictures below.
Fig. 1a
The signaling device after removing the plastic housing
Fig. 1b
The signaling device after removing the plastic housing and metal enclosure