4
A/C OUTLET
INPUTS
CD INPUT
VIDEO
AUXILIARY INPUT
TAPE INPUT
The A/C convenience outlet is fitted so
that other components can be powered
when the AC line cord of your amplifier is
plugged into mains outlet.
You must fit an Standard 3 pin plug,
available from most specialist dealers.
All audio Inputs and tape outputs are via
gold plated RCA type phono connectors.
All the phono sockets on your AMC
amplifier are marked "L" for left and "R"
for right channels, with the left channels
nearer the top of the cabinet.
Your
connection leads will have a white or
black plug for left, and a red plug for right.
The CD input is suitable for use with any
CD player. Connect your CD player to the
amplifier using the phono sockets marked
"CD."
The video input is suitable for most VCR's
with an audio output. Connect your VCR
using the phono socket marked "Video."
The Auxiliary input is suitable for use with
any extra source processing a line level
output, perhaps a second tuner or CD
player, or an additional tape or video
recorder wired for replay only.
This input is suitable for use with most
cassette, reel to reel or video recorders.
Connect the "record" leads of your tape
recorder to the phono sockets marked
"Tape out" on the rear of your amplifier
using phono/phono leads.
Connect the "playback"leads of your tape
recorder to the phono sockets marked
"Tape in" on the rear of your amplifier
using phono/phono leads.
Note: The A/C outlet is UNSWITCHED by
the power switch on your amplifier.
The maxinum output current rating
of A/C outlet is 1A.
UNDER NO CIRCUMSTANCES SHOULD
THE CASE OF THE AMPLIFIER BE
OPENED BY ANYONE OTHER THAN A
QUALIFIED ENGINEER, AS DANGEROUS
VOLTAGES ARE PRESENT INSIDE. ANY
UNAUTHORIZED REPAIR MAY INVALIDATE
YOUR WARRANTY.
PHONO INPUT
OPTION: COAXIAL INPUT
iPod / DAC
TUNER INPUT
The input is suitable for either moving
magnet or moving coil cartridges which
can be selected by the switch on Phono
board. Moving magnet cartridge is preset
in CVT3030MKII. Please ask your dealer
to change the MM/MC switch on Phono
board to MC if you use moving coil
cartridge. The plugs on your turntable
lead should be connected to the disc
input sockets on the rear panel of your
amplifier.
The Ground Terminal is for you to
connect ground wire of your turntable in
order to eliminate possible interference
and hum loop for best possible sound
quality.
AMC 24bit/192KHz S/PDIF DAC Module,
MD1108s, can replace PHONO module to
have digital input in CVT3030MKII.
The iPod/DAC input is suitable for use
with any iPod/DAC player. Connect your
iPod/DAC player using the phono socket
marked iPod/DAC.
The tuner input is suitable for use with
most AM/FM tuners. Connect your tuner
to the amplifier using the phono sockets
marked "Tuner."
Summary of Contents for CVT3030MKII
Page 2: ......