AMC CVT3030MKII Instructions For Installation And Operation Manual Download Page 10

8

SPECIFICATIONS

Weltronics Corp. reserved the right to improve its products at any time. Specifications
are subject to change without notice.

Rated Power into 8/4 ohms........................................................................30W
With both channels driven

Rated T.H.D.20Hz-20KHz............................

1KHz clipping power into 8/4 ohms...........................................................36W

High level inputs.........................................................................................34mV/180mV
Phono MM input......................................................................................0.4mV/2.2mV

High level inputs...................................................................................20K ohms/100pF
Phono input ......................................................................................47K ohms/100pF

Tone bypass 20Hz-20KHz.................................................................................+/-0.5dB
Normal 20Hz-20KHz..........................................................................................+/-1.0dB
High level inputs -3dB..................................................................................10Hz/80KHz

High level inputs "A" WTD.......................................................................................80dB
Phono inputs"A" WTD............................................................................................79dB
Separation 20Hz-20KHz ......................................................................................>50dB

Bass at 50Hz......................................................................................................+/-8dB
Treble at 10KHz................................................................................................+/-7dB
Overall feedback................................................................................................14dB

Dimensions (W x H x D)......................................................................430x112x288 mm
Net weight............................................................................................................14 Kgs
Shipping weight ..................................................................................................15 Kgs

.........................................................1.0%

Phono MC input......................................................................................0.04mV/0.2mV

Input Sensitivity for 1W/Rated Power into 8 ohms:

Input impedance:

Frequency response:

Signal to noise ratio(ref. 1W/8 ohms):

Tone control range:

PHYSICAL:

Summary of Contents for CVT3030MKII













Reviews: