27
When the
ENTER
button is pressed, the confirmation screen (described previously) is displayed.
If
‘Yes’ is selected, the edit value is persisted as the new value for the Sim Enable flag. Otherwise,
the edit value is rejected. In either case, the menu returns to the Override sub-menu menu with
the ‘ im Ena le’ menu item selected.
f ‘ im as’ is activated from the ‘ verride’ su -menu, then the display will be updated to show
the following editing screen.
When the
ENTER
button is pressed with the last digit highlighted, the confirmation screen
(described previously) is displayed. If
‘Yes’ is selected, the edit value is persisted as the new value
for the Sim Gas concentration value. Otherwise, the edit value is rejected. In either case, the
menu returns to the Override sub-
menu menu ith the ‘ im as’ menu item selected.
Selecting
‘E it’ from the ‘ verride’ su -menu returns the user to the sensor’s service menu ith
the ‘ verride’ menu item selected.
f ‘Reset is activated from the sensor’s service menu, then a software reset will be initiated on the
selected sensor with any confirmation. This command should be reversed for cases when the
sensor module appears to be non-responsive.
f ‘E it’ is activated from the sensor’s service menu, the user is returned to the main service menu
as outlined in section 5.2.7.
im as
Enter to Adv ursor
onte t sensitive help
Edit the simulated gas value one digit at a time using the
uttons.
ress
E TER
to advance the cursor to the ne t digit.
ress
E TER
hen the last digit is highlighted to save the value.
1 .
im as serves as a la el onl .