8
AV ACQUISITION 4001 / ©AMC VIBRO Sp. z o.o.
7.
InstaCal
To install the InstaCal utility software run the Icalsetup.exe file
located in the /InstaCal/ folder on the supplied CD. The software
will request permission to unpack and to install. Click OK and Setup
in a sequence of windows that will appear to access the installer
window. Then click the Next button twice (without changing the
access path) to confirm that you wish to launch installation and then
click Install.
When installation is complete, click the Finish button to close the
installer window. Restart the computer to apply the changes.
After the restart run the InstaCal software (Start > All programs > Measurement Computing > Instacal)
when the AVA module is connected to the computer. A window will appear with a list of measurement
cards which have been detected. Mark the item named USB-1608FS, click OK and close InstaCal.
The above procedure should be carried out once before using the data acquisition module for the
first time in data acquisition software.
8.
DASYLab® 16 configuration
Before starting to work with the AVA module in DASYLab®, it
need to be configured properly in the Configurator (by default:
Start > All programs > DASYLab > Configurator). In the program’s
window, in the Packages tab, the Measurement Computing option
should be marked. If it is not marked, please mark it, and click the
Enable button to launch the installation of drivers in DASYLab®.
In a sequence of windows that will appear, click Next, Next, Install
and Finish respectively.
The above procedure should be carried out only once when
using the module for the first time.
