26
User’s manual
EN
ERROR SIGNALS
D. ON/OFF:
1
(1 FLASH OF THE GREEN LED)
right motor error.
PLAY
OFF
ON
PAUSE
STOP
H
IG
H
B
A
TT
E
R
Y
LO
W
B
A
TT
E
R
Y
(A)
(B)
(C)
(D)
2
(2 FLASHES OF THE GREEN LED)
left motor error.
3
(3 FLASHES OF THE GREEN LED)
blade error.
4
(4 FLASHES OF THE GREEN LED)
tip-over error.
5
(5 FLASHES OF THE GREEN LED)
curb drop-off sensor error.
PART REPLACEMENT
RECOMMENDATIONS FOR REPLACING PARTS
Important
Carry out the replacement operations and repairs according to the Manufacturer’s instructions, or contact
the Service Centre if these operations are not included in the manual.
BATTERY REPLACEMENT
Important
Replace the batteries at an authorised service centre.
BLADE REPLACEMENT
1. Stop the robot safely (see “Robot safety stop”).
Important
Use protective gloves to avoid the risk of cutting your hands.
For replacement, use only the original blade suitable for the device.
MODEL: 6060BA0 - 6060DE0 - 7060BA0 - 7060DE0
Cutting blade code: 50_D0018_02
2. Turn over the robot and position it so as not to ruin the covering
hood.
3. Unscrew the screws (B) to remove the blade (A).
4. Insert a new blade and fasten the screws.
5. Turn the robot over to its operating position.
Important
check that the slope of the blade, with the robot in
the start position, is facing downwards.
INSERTING BLADE WITH SCREWS
(B)
(A)
check that the slope of the blade,
with the robot in the start position,
is facing downwards.
Summary of Contents for 6060BA0
Page 29: ...29 User s manual EN ...
Page 30: ...30 User s manual EN NOTES ...
