2
Ensure that you have read all other detail included in these
instructions prior to following the operating instructions detailed.
Plug the supply lead into the connector on the rear of the product
and put the rocker switch next to the connector inlet to the ‘ON’
position.
Figure 1
Wheeling
Figure 2
Standing for storage
Step 1
Step 3
Uncoil the hose from around the rear ring.
The heater can be operated on either a 110 or 230 volt electrical
supply by inserting a suitable connector/lead into either the 110 or
230 volt appliance connectors.
Attach the regulator to the gas bottle using the spanner provided.
Note Left hand thread.
Ensure the hose is not twisted or damaged and that the gas bottle
is positioned at the side of the unit to avoid heating at the outlet.
Note When positioning the heater please ensure that all inlets and
outlets are unrestricted there are no combustible materials in the
vicinity. Please ensure the heated air is not directed towards the
gas bottle.
Step 2
4 Operating instructions
3 Moving the product
MOBILE RADIANT HEATER
