Replacing the Lamp
Warning
-Always disconnect from the power supply before removing lamp.
Only a qualified engineer can replace the fault lamp.
Cleaning
Warning
-Always disconnect from the power supply before cleaning heater
For general cleaning use a soft clean duster-never use abrasive cleaners. The glass viewing screen
should be cleaned carefully with a soft cloth. DO NOT use proprietary glass cleaners.
Technical Specification
Supply: 110-130V~ 60Hz
Rated power: 750W-1500W
Lighting: 40W G9 Clear Halogen Lamp
Disposal
Environmental Protection
Waste electrical production should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
To reset the appliance, disconnect the appliance from the mains supply for at least 15 minutes.
Reconnect the supply to the mains and switch on the appliance.
Troubleshooting
Symptom
Solution
No operation/ no fan.
Check fuse by replacement.
Check for safety cut-off operation.
No fire effect light.
Check the bulb by replacement.