2
Installation Instructions
LED Driver Installation
WARNING
Quick Specs
Input voltage
120VAC
Output voltage
12 / 24VDC (Check Sticker)
Ambient Temp
-30 °C - + 40 °C / -86°F - + 104°F
Enviroment
Dry and Damp
Before You Begin
4. Wire Connections
With the power switched off, connect the wires according
to the wiring diagram below.
Note:
If you are connecting more than one wire to each
terminal, it is recommended to form a pigtail connection.
To avoid fire, shock, or death, turn the power off
at circuit breaker and test to ensure
the power is off before wiring.
ON
OFF
2. Punch knockouts for wiring
conduit access
1. Open wiring compartment
Wiring
compartment
Strip 1/4”(0.7 cm)
Neutr
al
Gr
oun
d
Lin
e
--+
LED Driver
W
a
rm
Whit
e
C
ool
Whit
e
- -
+
Bla
ck
Whit
e
Gr
een
Before You Begin
Determine the location of system parts :
1. Wall Switch
2. LED Driver
Note:
Max distance between Wall Switch and LED Driver
30m/100 ft.
Mount the Driver :
Select a suitable location, which can provide
adequate support for the weight of the driver.
Note :
Install the LED Driver in a well-ventilated
area free from explosive gases and vapors.
3.
B. Position LED Driver at an angle
over the bracket’s latches
A. Mount the wall bracket
C. Place LED Driver on the
bracket latches
D. Align LED Driver on bracket
E. Install the supplied lock screw
