50D0093 Rev 3 May 2005
Page 7 of 11
Ambient Technologies
A Division Of
Thermostatic Mode Operation:
1.
Push down on the flip door button to access the thermostatic control.
2.
Press the AUTO button to enter the thermostatic mode (Beep Once). “TSTAT” and SET temp icon will
appear on the lower LCD screen
3.
In thermostatic mode, press the UP
π
button or
θ
DOWN button to set the desired set temperature.
4.
Once the setting is completed, the transmitter will automatically turn on the fireplace when the room
temperature is below the set temperature and turn off the appliance when the room temperature is above
the set temperature within 1 degree.
5.
There will be a slight delay in the response of the unit (on/off) to a temperature. Room temperature is
monitored every 3 minutes.
6.
All the manual on/off touch will be disabled the the transmitter is in thermostatic mode.
7.
Press the Auto button to exit the thermostatic mode (beep once). The “TSTAT” and SET temp icon will
disappear on the lower LCD display. The transmitter will be in the manual on/off mode
Child-proof protection:
