background image

Warranty

Ambient Recording GmbH warrants against defects in materials and workmanship for 

a period of ONE (1) year from date of original retail purchase. This is a non-transfer-

able warranty that extends only to the original purchaser. Ambient Recording GmbH 

will repair or replace the product at its discretion at no charge. Warranty claims due 

to severe service conditions will be addressed on an individual basis. THE WARRANTY 

AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE. AMBIENT RECORDING GMBH DIS-

CLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. AMBIENT RECORD-

ING GMBH IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL 

DAMAGES ARISING FROM ANY BREACH OF WARRANTY OR UNDER ANY OTHER LEGAL 

THEORY. Because some jurisdictions do not permit the exclusion or limitations set 

forth above, they may not apply in all cases. 

For all service, including warranty repair, please refer to your original retailer. If not 

applicable obtain a return authorization through the contact form on our website to 

be included with the unit when sending in to the address next page.

rev. 1.0 © 2019, Ambient Recording GmbH

Summary of Contents for Lockit ACN-CL





























Reviews: