background image

Microphone ABT-M04N 

User Manual

6

Old electrical and electronic appliances
Electrical or electronic devices that are no longer serviceable must be collected 
separately and sent for  environmentally compatible recycling (in accordance with 
the European Waste Electrical and Electronic Equipment Directive). To dispose of old 
electrical or electronic devices, you should use the return and collection systems put 
in place in the country concerned.

Only used at altitude not exceeding 2000 m.

Only used in non-tropical climate regions.

2.  ABT-M04N

The ABT-M04N is a 4 button analog microphone with built in AUX input, push to talk key and LED 
indicating the ready-to-speak status with AUX active status. Microphone can be daisy chained with 
up to 35 microphones. Number of connected microphones depends on the total length of the Cat5e 
cable and supply voltage. 

Please see provided table.

To operate the device first select the Zones by pressing designated buttons and then press MIC 
button. The Mic LED will start blinking green for the time of matrix activation. When Mic led is 
green and red ring on the goose neck lights up, microphone is ready for live announcement. On the 
other microphones connected in the chain, AUX LED and MIC LED are blinking indicating that live 
announcement is being broadcast on other microphone. When finished transmitting the message 
release the MIC button to deactivate the gooseneck mic

Only one microphone can have aux input active. To use it please connect device to 3,5mm jack 
socket market as AUX, select the zones to which AUX signal will be transfer and select AUX button 
to creat connection. Geen led on Aux indicates that microphone has active aux input, on the other 
microphones in the chain AUX LED is blinking green. Microphone always has the higher priority 
over the AUX. When aux is activated on selected zones on one microphone it is possible to select 
different zones for live broadcast on other microphones. Deactivation of the MIC will activate 
previously selected zones with AUX. 

≤ 2000 m

Summary of Contents for ABT-M04N













Reviews: