Version
1.8
©Copyright
2011,
Ambient
LLC.
All
Rights
Reserved.
Page
9
te indoor humidity, in the Set Mode with indoor humidity flashing, press the
+
key or
To calibra
MIN/MAX
key to increase or decrease the humidity setting (in increments of 1%) to match the
calibrated or known humidity source. To return the indoor humidity to the measured value, press and
hold the SET key for 3 seconds and the humidity will return to the uncalibrated value.
Note:
The remote (outdoor) thermo-hygrometer will always display the measured humidity level
and not the calibrated humidity level. Only the console will show the calibrated value.
Note:
The dew point calculation is based on the calibrated humidity level.
4.3
Alarm Mode
4.3.1 Alarm Display
Wh
e
ALARM
key to enter the High Alarm Mode. Press the
ALARM
key
m Mode. Press the
ALARM
key again to return to normal mode (or
ile in Normal Mode, press th
again to enter the Low Alar
wait 10 seconds).
Note:
After entering the
ALARM
mode,
the console will display the high and low alarm
ettings. If the value reads
--.--
(dashes), the alarm is not active.
o set the alarms. The following are high and low alarms:
•
Time alarm (hour/minute)
ity high alarm
t high alarm
•
In the Low Alarm Mode press the SET key to select the following alarm modes:
ur/minute)
rm
low alarm
larm mode, Press the
+
key or
MIN/MAX
key to change or scroll the alarm value.
s
4.3.2
Alarm Programming
While in Alarm Mode, press the
SET
key t
High Alarm Limits:
•
Indoor humid
•
Indoor temperature high alarm
•
Outdoor humidity high alarm
•
Outdoor temperature / dew poin
•
Pressure high alarm
Low Alarm Limits:
•
Time alarm (ho
•
Indoor humidity low alarm
•
Indoor temperature low ala
•
Outdoor humidity low alarm
•
Outdoor temperature / dew point
•
Pressure low alarm
In the a
Hold the
+
key or
MIN/MAX
key for 3 seconds to change the number rapidly. Press the
ALARM
key
to select the alarm on or off (if alarm is enabled, the speaker icon on the LCD will be turned on
inue pressing the
SET
key to toggle through each
larm mode until it returns to the normal display mode.
indicating the alarm function has been enabled).
Press the
SET
key to confirm the setting and cont
a