Version 1.8
©Copyright 2011, Ambient LLC.
All
Rights
Reserved.
Page
14
use lithium batteries in cold
oting Guide
ntact us as follows:
Minimum 24 months for thermometer-hygrometer sensor (
weather climates)
7.
Troublesho
If your question is not answered here, you can co
1.
Email Support:
2.
Live Chat Support:
www.ambientweather.com/chat.html
(M-F 8am to 4pm Arizona Time)
4pm Arizona Time)
oble
3.
Technical Support: 480-283-1644 (M-F 8am to
Pr
m Solution
Wireless remote (thermo-hygrometer) not
n to console.
onsole.
The maximum line of sight communication range is
e the sensor assembly closer to the display
sor assembly is too close (less than 10’), move
e sensor assembly away from the display console.
xited the search mode.
ries in the remote
ermo-hygrometer. For cold weather environments,
sors are not transmitting
rough solid metal (acts as an RF shield), or earth
ole around electrical noise
enerating devices, such as computers, TVs and other
r location. Move the
mote sensor to a closer location.
ot transmit through
etal barriers (example, aluminum siding) or multiple,
reporting i
There are dashes on the display c
300’. Mov
console.
If the sen
th
Cycle power on the console. The console may have
e
Install a fresh set of batte
th
install lithium batteries.
Make sure the remote sen
th
barrier (down a hill).
Move the display cons
g
wireless transmitters or receivers.
Move the remote sensor to a highe
re
Radio Frequency (RF) Sensors cann
m
thick walls.
Temperature sensor reads too high in the
day time.
he north facing wall. Consider the
l
Make sure the thermo-hygrometer is mounted in a
shaded area on t
following radiation shield if this is not possible:
http://www.ambientweather.com/amwesrpatean.htm
Indoor and Outdoor Temperature do not
agree
ignal filtering. The indoor and outdoor temperature
Allow up to one hour for the sensors to stabilize due to
s
sensors should agree within 4 °F (the sensor accuracy is
± 2 °F).
Indoor and Outdoor Humidity do not
agree
ing. The indoor and outdoor humidity sensors
should agree within 10 % (the sensor accuracy is ± 5 %).
Allow up to one hour for the sensors to stabilize due to
signal filter