Version 1.2
©Copyright 2018, Ambient LLC. All Rights Reserved.
Page 2
transmitter).
2.1
Parts List
QTY
Item
1
Display Console
Frame Dimensions (LxHxW): 3 x 3.5 x 1 in
LCD Dimensions (LxW): 2.5 x 2.25"
LCD Segment Height: 0.75 inch
1
Thermometer transmitter (WH19)
Dimensions (LxHxW): 2.75” x 1.75” x 0.75”
1
User Manual
2.2
Recommend Tools
Hammer for hanging remote thermometer transmitter.
2.3
Thermometer Sensor Set Up
Note:
Do not use rechargeable batteries. They tend to have a lower operating voltage, do not have
a wide temperature range, and do not last as long as non-rechargeable batteries.
We recommend fresh alkaline batteries for outdoor temperature ranges between -4 °F and 140 °F and
fresh lithium batteries for outdoor temperature ranges between -40 °F and 140 °F.
1.
Remove the battery door on the back of the sensor by sliding the compartment door down, as
shown in Figure 1 .
Figure 1
1
Integrated hanger for zip tie
2
Wireless transmitter LED
3
AA Battery
4
Battery Compartment Cover
2.
Insert one AA battery.
3.
After inserting the battery, the remote sensor LED indicator will light for 4 seconds, and then
flash once per 60 seconds thereafter. Each time it flashes, the sensor is transmitting data.
4.
Close the battery door.
