Ambient Weather WeatherBridgePro, Quick Start Manual, Page: 20 / 23

Version 1.2 ©Copyright 2017, Ambient LLC. All Rights Reserved. Page 20
(http://opensource.org/licenses/mit-license.php). Link to code:
https://github.com/jcw/jeelib/blob/master/examples/Ports/bmp085demo/bmp085demo.ino
3.
MeteoBridgePro uses parts of the ATSHA204 library provided by Alessandro Chedini
(2013)
published under MIT license (http://opensource.org/licenses/mit-license.php). Link to code:
https://gist.github.com/ghedo/6751045
4.
MeteoBridgePro firmware uses the standard Arduino libraries provided under LGPL
(http://www.gnu.org/copyleft/lesser.html), linked only, without modification.
13. WeatherBridgePro Specifications

Dimensions: 57mm x 27mm x 95mm (2.24” x 1.06” x 3.74”) without antennas

Weight: 130g (0.29 lb) with antennas

Operating temperature: 0 - 60°C (32 to 140 °F) , non-condensing

100/10 Mbit Ethernet port

WiFi 2.4 Ghz, 802.11g/n (right SMA male connector on back panel)

RF-Sensor reception in 868-915 Mhz band (left SMA female connector on back panel)

External power supply (incl. plugs for US, EU, UK) with micro USB connector

Full size USB female connector on front panel

Micro USB female connector on back panel

4 LEDs on front panel, indicating

RF sensor reception (orange)

system operational (red)

network traffic (yellow)

sensor data stored (green)

Black/white OLED with 128 x 64 pixels to display status information and user defined data

Reset pin hole

Other Specifications:

Carambola 2 computing module (AR9331 SoC, 16 MB Flash, 64 MB RAM)

4 port USB hub (FE1.1s)

Voltage / power monitoring IC (INA220)

Barometer IC (BMP180)

Temperature / humidity IC (SHT21)

Low volume signaling buzzer

1 GB USB connected permanent storage (Toshiba THNU08SIPBLACK)
14. Troubleshooting Guide
Problem Solution
Outdoor sensor array does not communicate to
the WeatherBridgePro.

Reference the Ambient Weather Observer
Series weather station manual or Davis
Instruments Vantage Series for loss of
communication instructions in the
Troubleshooting guide.

Move the WeatherBridgePro as close as
possible to the weather station and reset the
WeatherBridgePro by powering down and up
the WeatherBridgePro.
Cannot communicate to the WeatherBridgePro,
both LAN (cabled) and WLAN (wireless).

Plug the WeatherBridgePro into your router
and perform a factory default (Section 7.3).