Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
Page 8
on the ambient room lighting (dims in low light).
5.3
Language Settings
In normal mode, press the
[-]
button to change the language as follows:
EN (English), NL (Dutch), IT (Italian), ES (Spanish) , DE (German), and FR (French).
6.
Specifications
2.1
Measurement Specifications
The following table provides specifications for the measured parameters.
Measurement Range
Accuracy
Resolution
Temperature
-23 to 122 °F
23°F to 32°F: +/-4°F
33°F to86°F: +/-2°F
87°F to 122°F: +/-4°F
-5°C to -0.1°C: +/-2°C
0°C to 40°C: +/-1°C
40.1°C to 50°C: +/-2°C
0.1 °F
2.2
Measurement Range
In the event the measurement ranges are exceeded, the temperature or humidity will read HI, Lo, or –
(dashes) under the following conditions:
Measurement
Condition
Display
Temperature
Temperature < -23°F
Lo
Temperature > 122°F
HI
5.3 Power Consumption
AC Power (6V, 300 mA)
1 x CR2032 button battery for back up power.
7.
Troubleshooting Guide
If your question is not answered here, you can contact us as follows:
1.
Email Support:
2.
Technical Support: 480-346-3380 (M-F 8am to 3pm Arizona Time)
Problem
Solution
The Radio Controlled Time does not set.
Be patient. Wait at least one week before
contacting Ambient Weather.
The RCC is a
shortwave signal originating near Fort Collins,
Colorado, and travels thousands of miles by
bouncing off the ionosphere. The signal is better
at night due to solar interference during the
daytime. The farther you are from Colorado, the
weaker the signal. Urban environments can also
affect the signal strength.