Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
Page 9
Operation
Display
Press the
SET
key again (do not hold) and the
minute will flash. Press
UP
or
DOWN
button to
change.
Press the
SET
key again (do not hold) and the
second will flash. Press
UP
or
DOWN
button to
reset to 0.
Press the
SET
key again (do not hold) and the
language will flash. Press the
UP
button to change
between GB (English), FR (French), DE (German),
ES (Spanish) and IT (Italian).
Press the
SET
button to save and exit the time and
date settings mode.
Figure 8
5.4
Alarm Settings
Operation
Display
While in Normal Time Mode, press the
ALARM SET
button for two seconds to enter the alarm setting
mode.
The alarm hour will flash. Press
UP
or
DOWN
button
to change.
Press the
SET
key again (do not hold) and the alarm
minute will flash. Press
UP
or
DOWN
button to
change.
Press the
SET
button to save and exit the alarm time
settings mode.
Figure 9
5.5
Using the Alarm and Snooze Functions
1.
Set the alarm time as described in Section 5.4.
2.
Slide the
ALARM ON/OFF/ ALARM RADIO
slide switch to the
ON
or
RADIO
position.
When the clock reaches the alarm time, the alarm will sound.
3.
To stop the alarm: Move the alarm switch to the OFF position, or wait one minute for the alarm to
stop, and it will sound again in 24 hours.
4.
To temporarily silence the alarm for five minutes, press the
SNOOZE/LIGHT
key on the top of
the radio. The alarm icon
will flash. After five minutes, the alarm will sound again. This will
continue until the alarm is turned off.
