Version 1.0
©Copyright 2016, Ambient LLC. All Rights Reserved.
Page 5
Next, press and hold the
M. SET
button again until the time is two minutes ahead of the current time.
The clock will begin updating again after the
M. SET
button has not been pressed for two minutes.
The clock will attempt synchronization every two hours (1:00, 3:00, 5:00, 7:00, 9:00, 11:00, 13:00,
15:00, 17:00, 19:00 and 21:00). During synchronization, the second hand will operate properly.
10
Forced Radio Resynchronization
To force resynchronization from the atomic clock, press and hold the
REC
button for 3 seconds. The
hands will return to the 12:00 position.
The clock attempts to synchronize with the atomic clock for 12 minutes. If it synchronizes, the clock
sets properly. If it does not receive the signal from the atomic clock (very likely during the daytime),
the clock will begin running from the 12:00 position until the time synchronization is successful.
The clock will attempt synchronization every two hours (1:00, 3:00, 5:00, 7:00, 9:00, 11:00, 13:00,
15:00, 17:00, 19:00 and 21:00). During synchronization, the second hand will operate properly.
11
Temperature and Humidity Sensors
The clock includes a temperature and humidity sensor, as shown in Figure 2. The clock is intended for
indoor use only.
Figure 2
12
Maintenance
The device is maintenance-free, but should be cleaned occasionally. Only use a slightly dampened and
soft cloth to clean the housing. Do not use abrasives or solvents.
