background image

50D0103 RCMT Rel 1  02/10/2006 

Page 7 of 7 

 Ambient Technologies

A Division Of  Monessen Hearth Systems

 

 
WARNING: 

Changes or modifications to this unit not expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment. 
 

NOTE: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 
and used in accordance with instructions, may cause harmful interference to radio communications. However, there 
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be determined by turning the equipment off and on, the user 
is encouraged to try to correct the interference by one or more of the following measures: 
 

• Reorient or relocate the receiving antenna. 

• Increase the separation between the equipment and receiver. 

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

• Consult the dealer or an experienced radio/TV technician for help. 

 

WARRANTY 

 

This warranty gives you specific legal rights and you may also have other rights that vary from state to state or 
province to province.  Answers to any questions regarding our limited warranty may be obtained by writing our 
corporate offices. 
 
Ambient Technologies warrants each new Ambient Technologies remote control against any defects that are due to 
faulty material or workmanship to the original owner, for a period of five years after the original date of purchase.  
This warranty and our liability does not apply to batteries, nor does it include damage to merchandise or the remote 
control resulting from accident, alteration, neglect, misuse, improper installation or any other failure to follow 
Ambient Technologies installation and operating instructions. 
 
Ambient Technologies agrees to repair or replace at its option any Ambient Technologies remote control under 
warranty provided it is returned postage prepaid to our warranty facility in a padded carton within the warranty 
period, with proof of the original date of purchase and a brief description of the malfunction.  This limited warranty 
does not include the cost of removal or re-installation.  

All Ambient returns must have a return authorization 

number from Ambient Technical Support. 

 
 
 
 
 

 

Ambient Technologies 

149 Cleveland Drive 

Paris KY 40361 

 

FOR TECHNICAL SUPPORT 

CALL 800-398-6195 

Summary of Contents for RCMT








Reviews: