ACL204
Rev. 4.10
©2016, Ambient Recording GmbH
4
3.
Safety Instructions
For your own safety and trouble-free use of your Lockit ACL204 please carefully read through the
instructions below. Always keep a copy of these instructions and hand them out with the unit to other
users.
This unit is exclusively intended for indoor use. Keep it safe and away from water, rain and humidity
and dry under all circumstances even when powered off. Clean gently with a slightly moistened cloth
and never let water, detergents or liquids of any kind get into the unit as this will imply the risk of short
circuits and electrical hazard.
Keep distant from sources of heat and never expose to direct sunlight. Admissible ambience
temperature is from +5° to +50° Celsius.
Do not throw or expose to mechanical impact and keep it safe from hard vibrations.
Only use genuine accessories such as cables antennae etc. which have been supplied by an authorized
dealer. Always observe integrity and the pertinent compatibility with all units connected to.
Do not perform software updates in situations the integrity of mains supply can not be granted such as
thunderstorms and remove connections from and to all devices directly or in directly connected to
mains.
Only use intended batteries type Mignon AA with 1.5V. Watch correct polarity when inserting the
batteries, instructions can be found in the manual and on the device itself. Disregard of handling may
cause battery leakage or even risk of explosion.
To maintain secure electrical contact the batteries are loaded with high spring tension and can shoot
out of the compartment if opened without attention.
Always secure the outer battery contact and release slowly when accessing the compartment.
Proper recycling of used batteries might mandatory be instructed by local law. Please check for
requirements and dispose at foreseen institutions. With regard to environment only dispose
completely discharged batteries.
When powering from external sources remove the batteries and put the power switch into the "OFF"
position. Pay attention to the use of LPS sources in compliance to part 2.5 of EN 60950-1.
When using the wireless connection of the Lockit ACL204 place it centrally and keep it distant from
sources of possible interference such as microwaves or electrical devices with large metal surfaces.
If possible always use the integrated antenna. If the application of an external antenna seems
mandatory only use the original part directly attached to the socket. Extension or use of 3rd party
accessories is not licit.
Never open the unit. Inappropriate and unauthorized access will void the warranty and imply possible
risk of harm to the user.
When disposing the unit follow the legal requirements for recycling electronic equipment.
