The remote control function is same as the button on the heater body, it allows you to operate easily. When using
remote control, it should be aimed at receiving window of the unit, effective distance is around 6 meters.
Point the remote control towards the heater and press the button. If the remote control does not operate the unit
when pointed directly at it, replace the battery .
a) Open the cover, remove the old battery and replace with the same battery type. Always observe the correct polarity
when installing the battery.
b) Do not mix new and old batteries.
c) Replace a battery immediately once it is exhausted to prevent leakage
d) Remove the battery if the remote control is not used for long periods.
e) Do not attempt to recharge non-rechargeable battery.
f) Do not dispose of the battery in a fire as they may explode.
Trouble shooting
If your heater fails to operate, please follow these instructions:
Ensure that your circuit breaker or fuse is working properly.
Be sure the heater is plugged in and that the electrical outlet is working properly.
Check for any obstruction. If you find any obstruction, turn the heater off. Unplug the heater and wait a few minutes for
it to cool down. Carefully remove the obstruction.
Plug the heater in and turn it on again by referring to the OPERATING
INSTRUCTIONS.
Maintenance , Cleaning & Storage
Warning! Always disconnect the mains power supply before cleaning the Unit.
1. Use a soft dry cloth to clean the surface of the product. Wipe dry with a clean cloth.
2. Use warm water with a mild detergent and a soft damp cloth to clean the product. Wipe dry with a clean cloth. Do
not pour water onto or into the unit.
To store your product in the off-season, we recommend using the original (or appropriately sized) box. It is important
to keep it in a safe, dry location.
CLEANING AND MAINTENANCE
1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe the exterior surfaces of the heater
occasionally with a cloth moistened (not dripping wet) with a solution of mild detergent and water. Dry the case
thoroughly with a soft dry cloth before operating the heater.
2. The fan motor is lubricated by the factory, and will require no further lubrication.
3. No other user maintenance is required or recommended. If service is required, send your heater to the nearest
authorized service depot.
4. Store heater in a clean and dry place when not in use.
REMEMBER - portable electric heaters are designed for spot heating, or as a supplementary heat source. They are
not intended to be main sources of heat during the normal heating season.
Note: There may be trace of smoke or odour when unit is first operated. Do not be alarmed. This indicates that a drop
of oil fell on the heating coil during the manufacturing process. It will quickly evaporate, and should not re-occur.
Technical Parameters
Model NO. NDK15-12K
Voltage
220-240V AC
Frequency 50Hz
Power
Low 750W/High 1500W
8
