Supplied parts
Lay each section of the frames on a tidy flat surface. (Fig 1)
Step 1
Unfold screen fabric and insert the tensioning bars into the fabric
grooves. (Fig 8-10)
Step 4
Align fixing lugs and the eyelets provided on the fabric. Using the
tensioning bar, pull fabric eyelets over the lugs. (Tip: Arrange horizontal
tensioning bars first then side tensioning bars). (Fig 11-15)
Step 5
Slide Fixing Lugs into grooves on the reverse side of frames.
(Fig 2 - 3)
Step 2
Insert both horizontal and vertical frame sections with the corner
stakes. Ensure all joints are square and then lock off by
tightening with the screws provided. (Fig 4-7)
Step 3
Required (not supplied)
Electric Drill
Screw Driver
Level
8 x Screws
to suit wall type
Horizontal Frame (x 2) &
Vertical Frame (x 2)
Fixing Lug
28 for 100”
30 for 115”
Side Tensioning
Bar (x 2)
Corner Brackets (x 4)
10mm Corner Screw
Horizontal Tensioning
Bar (x 2)
Mount (x 1)
Horizontal Frame
Vertical Frame
Fig 1
Fig 3
Fig 2
Fixing Lug
Fig 4
Fig 5
Fig 6
Fig 7
Corner
Horizontal
Frame
Vertical
Frame
Fig 8
Fig 9
Fig 10
Fig 13
Fig 14
Fig 15
Fig 12
Fig 11
