amber connect Amber Vision C410, Quick Start Manual

Page: 10 / 15

.
3.5 Installation of Accessories
You can select a proper position to install the remote camera according to actual conditions
3.5.1
Remote AHD Camera
1. Face the camera inward and install it to the windshield behind the rear-view mirror (as
shown in

) or to the middle of the dashboard (as shown in

). Wipe a selected
position clean, remove the protective film from the 3M tape, and attach the device.
2. Use the supplied screwdriver to tighten the screw of the camera, so it keeps at the best
angle. Connect the cables correctly and fas1en them securely.
3.5.2 DMS Camera
This section, is dedicated to AVC410.
The DMS camera is mainly used for monitoring the driver. Fixate the camera at an angle
about 30" to the steering wheel directly facing the driver's head, as the following figure
shows.