ambe Multi 49, User Manual

Page: 10 / 36

10
3.
Fix back the fending bars after the panels are removed.
3. Install the fireplace into the wall opening. Fix the FOUR wall screws in each side of the
fireplace box.
4. Place the decorative crystals and driftwood log pieces on the designed slot and keep them
even.
5. After placing the decorative crystals and drift log pieces on the designed slot, fasten
screws back on the glass panel and metaltrim. Reinstall the fascia if desired.
9
3. Install the fireplace into the wall opening. Fix the FOUR wall screws in each side of the
fireplace box.
4. Place the decorative crystals and driftwood log pieces on the designed slot and keep them
even.
5. After placing the decorative crystals and drift log pieces on the designed slot, fasten
screws back on the glass panel and metaltrim. Reinstall the fascia if desired.
9
4. Remove the screws from the fireplace as shown in the picture below.
3. Install the fireplace into the wall opening. Fix the FOUR wall screws in each side of the
fireplace box.
4. Place the decorative crystals and driftwood log pieces on the designed slot and keep them
even.
5. After placing the decorative crystals and drift log pieces on the designed slot, fasten
screws back on the glass panel and metaltrim. Reinstall the fascia if desired.
9
3. Install the fireplace into the wall opening. Fix the FOUR wall screws in each side of the
fireplace box.
4. Place the decorative crystals and driftwood log pieces on the designed slot and keep them
even.
5. After placing the decorative crystals and drift log pieces on the designed slot, fasten
screws back on the glass panel and metaltrim. Reinstall the fascia if desired.
9
5 .
Fix the brackets with the screws in the previous step.