AMBASSADOR PROFILINE A-1004, Manual

Page: 24 / 40

2. Wash all parts, except for the motor unit and protection cap of food processor blade, in a
warm suds.
. Wash all parts, except for the motor unit and protection cap of food processor blade, in a
warm suds.
Cleaning the motor unit Cleaning the motor unit
Take care: Never immerse the motor unit in water or other liquids. Take care: Never immerse the motor unit in water or other liquids.
Clean the motor block with a moist, soft sponge and a little detergent. Clean the motor block with a moist, soft sponge and a little detergent.
SOLVING PROBLEMS SOLVING PROBLEMS
Nr. Nr. Problem Problem Possible solution Possible solution
1 The appliance does not go on.
Make sure that all assembly indications (on the lid of
the bowl, on the bowl, on the blender jar and on the
motor unit) are aligned.
The lid of the bowl may have become undone during
a heavy processing job. Close the lid properly. The
device immediately starts working again.
2
The appliance suddenly stops
running.
The processing job is too heavy. Set the control knob
to ‘off’ to switch off the device and remove the mains
plug from the wall socket. Then let the device cool
down to room temperature. Plug in the device and
switch it on again. Process smaller batches.
24