4.15.2 Low level sensors
4.15.2.1 Seed
The low level sensor
1
triggers an alarm as soon as
the low level sensor is no longer covered with seed.
CMS-I-00001986
4.15.2.2 Fertiliser
The low level sensor
1
triggers an alarm as soon
as the low level sensor is no longer covered with
fertiliser. The low level sensor can be installed at
different positions
2
. As a result, the triggering point
can be adapted to the spread rate.
1
2
CMS-I-00001987
4.15.3 Electronic remote scraper bar adjustment
With the electronic remote scraper bar adjustment
1
, the scrapers are conveniently adjusted on the
control terminal.
In conjunction with SmartControl, the scrapers are
controlled automatically. By means of the opto-sensor
monitoring, gaps or doubles are detected and the
scraper bar position is adjusted. This automatically
reduces gaps and doubles.
1
CMS-I-00001917
CMS-T-00001979-B.1
CMS-T-00001981-B.1
CMS-T-00001983-A.1
CMS-T-00001984-B.1
4 | Product description
Electronic monitoring
MG6967-EN-II | C.1 | 27.09.2021
46
