Cutting
, scarifying and mulching
PROFIHOPPER BAF0012.6 04.18
67
8.4
Collection system
The cuttings are collected and are conveyed by worm conveyors into the
hopper where they are compressed. The drive belts on both worm con-
veyors are fitted with an overload switch in case they become blocked
with foreign bodies.
CAUTION
Risk of damage to the overload clutch.
The warning light on the instrument panel also comes on.
Switch off the mower unit as quickly as possible.
ATTENTION
After the period, from the shutdown of the engine to a complete stop
of the rotor, is ca 5 seconds.
The mowers may only be opened when the rotor hibernation has
been achieved.
Clean the worm conveyors as follows:
Cleaning the transverse worm:
1. Switch off the mower unit.
2. Switch off the engine
3. Open the mower unit cover with the crank handle (Fig. 8.4-1).
4. Secure the cover with the holding strap (Fig. 8.4-2).
