Starting
and using the machine
PROFIHOPPER BAF0012.6 04.18
53
7.4
Starting and stopping the engine
To start the engine, sit on the drivers seat and proceed as follows:
1. Make sure the parking brake is on.
2. Do not operate the accelerator pedal or Steering wheel.
3. Turn the ignition key clockwise until the glow-plug light comes
on.
4. When the glow-plug light goes out, turn the key clockwise and
release it as soon as the engine is running. Move the accelerator
lever no further than the centre position. Do not interrupt the
starting procedure but do not try to start the engine for more
than 5 seconds at a time.
CAUTION
Never start the engine in an enclosed space.
There is a risk of asphyxiation.
To switch off the engine, proceed as follows:
1. Bring the machine to a stop.
2. Move the accelerator lever back to the idle position.
3. Apply the parking brake.
4. Turn the ignition key anti-clockwise.
•
The driver's seat must be occupied to start the engine.
•
The driver's seat can be left without the engine stopping if:
ο
the parking brake is applied.
ο
the cutting deck is switched off.
