Amazone KG 6002-2, Original Operating Manual

Page: 92 / 118

Every 500 operating hours
Changing the oil of the manual transmission see page 91
Changing the oil of the angular gearbox see page 92
Replacing the oil filter see page 93
Every 50 operating hours / weekly
Checking the hydraulic hose lines see page 87
Checking the oil level in the manual transmission see page 89
Checking the oil level in the angular gearbox see page 90
Checking the oil level in the spur gear trough see page 90
Every 50 operating hours / as required
Universal joint shaft maintenance see page 95
Every 50 operating hours / Every 3 months
Checking the wheel mark eradicator coulter see page 94
Every 100 operating hours / Every 12 months
Checking the wheel bolt tightening torques see page 87
9.1.2 Checking the top link pin and lower link pin
INTERVAL
daily
1. Check the top link pins and lower link pins for
cracks or broken areas.
Permissible wear 2 mm
2. Replace the pins if there is significant wear.
CMS-T-00002330-E.1
9 | Repairing the machine
Maintaining the machine
MG6750-EN-II | C.1 | 21.07.2021 86