General safety instructions
8
Groundkeeper GH / HH SMARTCUT BAF0005.4 06.21
2
General safety instructions
This section contains important information on safe operation of the
machine.
2.1
Obligations and liability
Comply with the instructions in the operating manual
Knowledge of the basic safety information and safety regulations is a
basic requirement for safe handling and fault-free machine operation.
Obligations of the operator
The operator is obliged only to let those people work with/on the ma-
chine who
•
Are aware of the basic workplace safety information and acci-
dent prevention regulations.
•
Have been trained in working with/on the machine.
•
Have read and understood this operating manual.
The operator is obliged
•
To keep all the warning symbols on the machine in a legible
state.
•
To replace damaged warning symbols.
If you still have queries, please contact the manufacturer.
Obligations of the user
Before starting work, anyone charged with working with/on the ma-
chine is obliged
•
To comply with the basic workplace safety instructions and acci-
dent prevention regulations.
•
To read and understand the section "General safety information"
of this operating manual.
•
To read the section "Warning symbols and other labels on the
machine" of this operating manual and to follow the safety in-
structions represented by the warning symbols when operating
the machine.
•
To get to know the machine.
•
To read the sections of this operating manual, important for car-
rying out your work.
If it comes to the attention of the user that the safety features of the
equipment are not in working order, the user must rectify this immedi-
ately. If this is not a task that is normally carried out by the user or if
the user has insufficient technical knowledge to do so, the user must
notify his superior (owner/operator) about the defect.
