Amazone E+S, Operation Manual, Page: 24 / 44

24
Mounting and dismounting
DB 534 02. 02
5.1 Mounting
Mount the spreader to the rear three point hydraulic
cat. I or II or to a special fitting device on the towing
vehicle (please refer to chapter 2.5.
2.
-
Push lower link of the towing vehicle or of the
fitting device on to the lower link pins (cat. I or II)
(1) and secure by using a clip pin.
- Fix upper link with fixing (Kat. I or II) (2) and
secure.
D
49
20
5
Hasb
erg
en
-
zu
l.N
ut zl
.:
Ty
p:
M as
ch
.N
r.:
a
Never fix upper link of cat. II with pin of
cat. I.
a
Advise people to leave the danger area
behind or underneath the implement
while carrying out settings on the upper
linkage.
a
In lifted position of the spreader the
lower link arms of the tractor may have
only little lateral play so that the
implement does not swing to and fro
during spreading operation. Secure the
lower link arms of the tractor with
stabilising rods or chains.
5.1.1 E+S with PTO shaft
-
Push the PTO shaft on to the tractor universal
joint shaft.
a
Ensure a proper catching of the PTO
shaft connection.
I
When initially fitted and when changing
the vehicle type match PTO shaft (for
this, please refer to para. 5.3).
-
Hook in fixing chains of the PTO shaft guard on
towing vehicle and implement side so that a
sufficient swivel range of the PTO shaft in all
operating positions is ensured and that the PTO
shaft guard does not spin during operation.
I
On towing vehicle and implement only
use PTO shaft with complete guard and
additional guard fitted. Replace guards
immediately once they have been
damaged.
1
2